Floor Painting in KL, PJ, Shah Alam, Klang, Selangor

The most common maintenance method for the floor is a layer of paint, which is not only beautiful, but also can improve it safety of use, so that the service life of the floor can be extended. Here are some of tips to paint the floor:

First, inspect the floor

Check if the floor is loose. If yes then we advise to add nail to fasten.

Note: Make sure you hammer the nail butt deep in half centimeter. If the floor itself is high or uneven, then you need grind the floor to make it even and therefore you need to hammer even more deeper inside to prevent the floor from grinding to the nail

Second, clean up

You can first use a vacuum cleaner to clean the dust

Note: The dust in the crevice also needs to be sucked up by the vacuum cleaner, because the dust will directly affect the quality of paint.

Third, repair seam

After checking and cleanup the floor, you can start to make up the floor gap. Use the wood varnish to fix the gap and add color to match the floor color. Wait for the material to dry before polishing.

Fourth, grinding

Grinding the floor paint generally uses 60 points to grind first, then use 80 mesh to grind, then use 120 mesh sand paper to grind.

Note: Do not ignore any corners.

Fifth, brush primer

It is also necessary to clean the dust once before the primer, and then add 3 times thinner to the floor paint. The paint curing agent can be added 20% more than before, which will be quicker and easier to polish.

Note: This time you need to use a wool brush to brush your floor and brush evenly, especially in crevices, to ensure that the floor is fully paint to prevent water go inside the floor via the crevices.

Our team at PaintingServicesPro is here to assist you if you need help. Please contact our team to enquire or for a FREE quote today.